| HOME BACK |
Wraith NT #1 Owner: Neal Moser |
This Wraith is my personal "gigging"
guitar and I built it to all my personal specs. Wood: Two piece laminated White Limba neck-thru with a 3A Maple cap. Solid Walnut wings. 25" scale, 22 fret Ebony finger board with our "Tribal M" inlaid in the first fret and my personal "Sig." at the 12th. Dunlop 6105 fret wire. Kahler 2315 trem. DiMarzio Super 2 at the bridge and PAF at the neck. |
This is my personal electronics setup: Left
to right: 3 position center off mini switch which is a stand-by switch
in the center, down is on and up is an .02 cap from the signal to ground.
3 position Pickup selector switch. Two position mini switch, down is normal
booster and up will bite your ass. The next mini switch is a two position
volume control. Up is full volume and down is connected to a trim pot
inside the guitar. The last switch just below the bride pickup is the
booster on-off switch. This is the most convenient electronics layout
for me when I play live. |
When most people see the heel on this guitar
I get "WTF", however, there is a method to my madness. When
I slide my hand up the neck and my thumb hits that block, it puts my third
finger on the 22 fret. ;-) Also, I don't play up there very often and
that neck block really makes for a stable neck. |